J3 PERIPHERAL EQUIPMENT Press and tools products Ball bearing inserts and rails If you need fast and reliable tool changing, you will find that equipping or updating your press with ball bearing inserts and rails is the ideal solution. With ball bearing inserts and rails you can move or change tools fast, and above all accurately - even if they weigh several tons. In the past this has often been an awkward, inconvenient and sometimes even critical process. Equipping and retrofitting press tables with ball bearing rails is extremely straightforward as virtually every press table has fixing slots. The ball bearing rails are simply inserted and fixed in these slots. Ball bearing inserts can be used for press tables which do not have fixing slots. These are fitted in the locating sockets. The ball bearings of the inserts and rails will move in any direction and project only slightly above the surface of the press table. The result is that only slight force is required for movement on the table. When the tool is clamped in place it sits on the table and the clamping pressure causes the ball bearings to retract into their sockets. Roller inserts and roller rails Roller inserts and rails will carry twice the load of ball bearing inserts and rails and ensure precise linear movement of the tool. This linear technology requires precise positioning of the tool when it is transferred to the tool bench. Roller rails are used especially on presses with stationary mounting devices. The special roller bearing technology operates reliably at high temperatures (200 °C). Unlike ball bearing rails, roller rails can be used in tool base plates, i.e. installed upside down. Conveyor belts Our conveyor belts are designed for use in a wide variety of production applications. JThere is a belt width and length to suit almost every application. The conveyor belts are powered by an electric motor, which is electronically regulated to provide belt speeds from 0.02 to 30 metres per minute. The motor can be mounted horizontally or vertically, on either side of the belt for either direction of movement. Various limitation guides are also available. Pneumatic conveyor This pneumatic conveyor is unique and is patented. It was designed to provide an effective and affordable solution to the problems of conveying parts and disposing of waste. This beltless system conveys stampings and waste from the tool area by vibration alone. Electro-mechanical transporters The FIBRO electro-mechanical transporters have been developed to effectively and inexpensively solve the problems of transporting parts and the removal of stamping and cutting residues from presses. The principle behind the electro-mechanical transporter is referred to as the "tablecloth effect". The slow acceleration during the forward stroke pushes the parts or offcuts forwards. The fast return stroke of the guiding system results in a transport movement in only one direction. Electric transporter The electric drive transporter conveys the punched and waste parts out of the tooling area with a rhythmic movement in a straight line. Low energy consumption, infinitely variable speed control, simple automation, low noise (60 dB) and the absence of compressed air ensure high economic efficiency whilst improving the working environment. Its main areas of application are conveying and separating solid materials in metal processing and the automotive sector. The additional "Clean Line" product range can also be used as a replacement in the food and pharmaceutical industries.
RkJQdWJsaXNoZXIy MTIwNzY0