J55 2299.61.1□100.12 222 57 115 145 210 ø4,2 (2x) 1 230 V 3 2 subject to alterations 2299.61. Control unit CLEAN LINE Description: The control unit is the electrical module for controlling the transporter. Material: Aluminium die casting IP67 Technical data: Temperature operating range: -20 to +40 °Celsius (environment temperature) Note: The control unit must be mounted on a metal surface for heat dissipation. Before connecting the electric transporter, check that the channel can move freely in the direction of travel. Included in the delivery, Mains connection incl. plugs for USA and GB, Fixing bolts DIN EN ISO 4762 M4 x 20 (x 2) stainless steel A2 TRANSPORTER ELECTRICAL - ACCESSORIES CONTROL UNIT CLEAN LINE, SIGNAL CABLE, CONNECTION CABLE 1-phase 110-230 V, 50-60 Hz, earthed connection 1 - Changeover between PLC and manual operation PLC mode: In this position, this start/stop function is controlled via the straight signal cable (M12 plug). Manual mode: In this position, the start/stop function is controlled by the control unit. 2 - 2299.60.81.01. Signal cable straight, to the press order separately Order No l m] 2299.60.81.01.03 3 2299.60.81.01.05 5 2299.60.81.01.10 10 For further information, see catalogue page for straight signal cable 3 - 2299.60.82.01. Connection cable straight/straight, control unit - transporter order separately Order No l m] 2299.60.82.01.03 3 2299.60.82.01.05 5 2299.60.82.01.10 10 2299.60.82.01.15 15 2299.60.82.02. Connection cable straight/90°, control unit - transporter order separately Order No l m] 2299.60.82.02.03 3 2299.60.82.02.05 5 2299.60.82.02.10 10 2299.60.82.02.15 15 Order No Connection [V] Power requirement [A] 2299.61.12100.12 230 1,2 - 2,2 2299.61.14100.12 230 0,75 - 1,7 2299.61.18100.12 230 0,55 - 1,3
RkJQdWJsaXNoZXIy MTIwNzY0