LIDECO Standard Parts 07/2022

E182 22 9 1 . . F44 ... 26 9 6 . . F44 ... ° P P/ P/ „X“ ° a ( ), R . ( ), R . ( ), R . ( ), R . subject to alterations PUNCH/CUTTING BUSHINGS, STANDARDISED SPECIAL FORMS - EXAMPLE ORDERS Punch: 22 without ejector pin Special shape You will find diameters and lengths on the pages of punches you have selected. Type: Order No ISO = 1 ball-lock, light duty = 2 ball-lock, heavy duty = 3 ball-lock, larger cutting edge, light duty = 4 ball-lock, larger cutting edge, heavy duty = 5 Attention! All the parameters must be given for special shapes! Special shape F 44 Matrixes Special shape You will find diameters and lengths on the pages of cutting bushes you have selected. Type: Order No automotive standard = 5 without shoulder ISO 8977 = 6 with shoulder ISO 8977 = 7 Attention! All the parameters must be given for special shapes! Special shape F 44 Cutting gap (a) Roundings with the corresponding sharp corners reduce the cutting gap per side (a). If the cutting gap is 0.04 mm (a) or less, FIBRO will round the sharp edges if the cutting punch and the matrixes are ordered together. This reduces the installation time and the risk of an edge breaking during operation. Note: (1) and (2) - roundings and sharp edges (1) rounding on the cutting punch of max. R0.2, corresponds to a sharp edge on the matrix (2) rounding on the cutting matrix of max. R0.2, corresponds to a sharp edge on the punch View „X“ (2), max. R0.2 (2), max. R0.2 (2), max. R0.2 Matrix (1), max. R0.2 Punch