L24 ød 1 h7 l DATE STAMP COMPLETE, EMBOSSED LETTERING Material: 1.2767, hardened HRC 54±2, ground Note: The sleeve and insert can be ordered separately (see ordering example). Description: - sleeve with engraving - adjustable insert with display arrow and year (can be rotated using an ordinary screwdriver) - metric thread for fixing - mirror image engraving Mounting: Fixing: Screw in the insert in a clockwise direction until it is flush with the top edge and set to the required position. Setting: Set the insert by turning clockwise or anti-clockwise. When correctly set, the insert of a stamp with d1 = 6 mm (.060.) is typically a maximum of 0.1 mm above or below the top edge of the sleeve. Changing: To change the insert turn it anti-clockwise to remove. ød2 ød1h6 s l +0,1 t m 2280.01. Embossing depth a Insert 2280.01.xxx.xx.2 Compression spring Sleeve 2280.01.xxx.10.1 with xing thread Marking embossing Mounting example d1 d2 l m t s a 4 2.5 14 2 2 0.2 0.3 5 3.1 17 3 3 0.2 0.4 6 3.1 17 3 3 0.2 0.4 8 4.6 20 4 4 0.35 0.4 10 4.6 20 5 4 0.35 0.4 12 6.4 25 6 6 0.5 0.6 16 8.4 33 8 8 0.6 0.6 2280.01. Date stamp complete, embossed lettering Order samples: Date insert, complete = 2280. Standard design = 2280.01. Diameter of guide sleeve d1 = 5 =2280.01.050. Sleeve with display: Months (1-12) = .01.050 10. Insert with display: Arrow + year (variable) e.g. 2004 =0.01.050.1 0.04 Order No = 2280.01.050.10.04 Date insert, Insert = 2280. Standard design =2280.01. Diameter of guide sleeve d1 = 5 = 2280.01. 050. Insert with display: Arrow + year (variable) e.g. 2004 =2280.01.050.04. Insert =2280.01.050.04.2 Order No = 2280.01.050.04.2 Date insert, Sleeve = 2280. Standard design =2280.02. Diameter of guide sleeve d1 = 5 = 2280.01.050. Sleeve with display: Months (1-12) =2280.01.050.10. Sleeve =2280.01.050.10.1 Order No = 2280.02.050.10.1
RkJQdWJsaXNoZXIy MTIwNzY0