NEW PRODUCT
RECIRCULATING BALL BUSHES

The recirculating ball bush is used when very large paths (strokes) are travelled. This is only limited by the mounting situation.

FLYER

RECIRCULATING BALL BUSH
~ISO9448-3

In comparison to guides with ball cage, however, the lower dynamic load figures (C) should be observed. Despite the high number of ball tracks, fewer balls are in usage.

For optimum service life, a movement path (stroke) of three times the length of the recirculating ball bush is recommended (3 x l1).

 

MATERIAL:

Socket: Steel, hardened 62 ± 2 HRC
Ball carrier: Aluminium
Balls: Steel, hardened, conforming to DIN 5401

EXECUTION:

Outside diameter precision ground.

SLIP-FIT BONDING:

The bush is accurately positioned by means of H5 slip-fit hole. The slip-fit adhesive (order no. 281.648) is used solely to secure the bond.

ADVANTAGES OF SLIP-FIT BONDING:

- High accuracy and stability
- Ease of interchangeability

We do not recommend press-fitting the bush since that causes unacceptable alteration to the shape of the bush.
Fastening within the locating hole using DIN 472 locking rings is possible.

NOTE:

☛ For appropriate guide combinations, see selection matrix
☛ Lifetime calculation and dynamic load figures
☛ Installation guidelines / dimension tables
Recirculating ball bushes only with red guide pillar = .30 combinable.

 

RECIRCULATING BALL BUSH
WITH COLLAR ~ISO9448-7

The recirculating ball bush is used when very large paths (strokes) are travelled. This is only limited by the mounting situation.
In comparison to guides with ball cage, however, the lower dynamic load figures (C) should be observed. Despite the high number of ball tracks, fewer balls are in usage.

For optimum service life, a movement path (stroke) of three times the length of the recirculating ball bush is recommended (3 x l1).

 

MATERIAL:

Socket: Steel, hardened 62 ± 2 HRC
Ball carrier: Aluminium
Balls: Steel, hardened, conforming to DIN 5401

EXECUTION:

Outside diameter precision ground.

NOTE:

The attachment is with 3 retaining elements, from Ø d1 = 38 with 4 retaining elements , which are included in delivery (Order No: 207.45 - retaining element incl. socket head bolt DIN 6912, M6x20, head Ø 13).

☛ For appropriate guide combinations, see selection matrix
☛ Lifetime calculation and dynamic load figures
☛ Installation guidelines / dimension tables
Recirculating ball bushes only with red guide pillar = .30 combinable.

 

Downloads